If a thru-hull flush-style transducer is called for, the Tilted Element 525T-LTD/12 will accommodate a deadrise angle between 8o and 15o, while the Tilted Element 525T-LTD/20 is right for hulls with a deadrise angle of between 16o and 24o. Both of these transducers compensate for deadrise by angling the element inside the housing.
The transducer is labeled with an arrow on top of the housing that should point towards the keel, whether it is installed to port or starboard. This ensures that the tilted element within the housing is given the correct orientation.


600 Watts
50/200 kHz
20/6 degree Beam Angles
Bronze Thru Hull with Temperature
30 Foot Cable with 10-Pin Connector