|
SANUS SYSTEMS BF-31B Wood Speaker Stands | 
 enlarge | Brand: Sanus
Category: CE
Buy New: Too low to display
New (24)
Avg. Customer Rating:  53 reviews
Media: Electronics
Autographed: No
Memorabilia: No
Shipping Weight (lbs): 14.7
Dimensions (in): 15 x 32 x 29
Legal Disclaimer: Warranty does not cover misuse of product.
MPN: BF31b
Model: BF31b
UPC: 793795260079
EAN: 0793795260079
Availability: Usually ships in 24 hours
|
| Features:
| • | 31" high | | • | Concealed wire management | | • | Furniture-grade appearance with upscale performance | | • | Twin contoured pillars give support and rigidity | | • | Constructed of medium density fibercore to minimize resonance |
|
| Similar Items:
|
| Editorial Reviews:
Product Description
The Basic Foundations BF31b is a 31-inch black speaker stand for small bookshelf speakers up to 20 lbs. A solid, energy-absorbing MDF pillar supports a 5 by 5-inch top plate with neoprene speaker isolation pads for superior acoustic quality. ABS push-in carpet spikes add stability, and a built-in concealed wire path hides speaker cables for a clean and organized appearance in any room.
|
| Customer Reviews: Read 48 more reviews...
fine, but don't believe everything February 2, 2006
23 out of 23 found this review helpful
They serve the purpose and look nice, but both the ad copy and the instructions may be misleading enough to invite comment.
1. They're not wood. They're some quite unobjectionable black stuff that may be better suited than wood. Sanus makes more expensive stands out of wood, but not these.
2. The "wire management" system, if implemented as suggested, is idiotic. There are holes but no grooves in both the base and the speaker platform. If you stick the wires through them, then both the speaker and the whole stand will wobble on the wires.
Fortunately, there is no need to do so. Just leave spaces at the top and bottom of the back and run the wires through there.
3. Even worse, they tell you to set the speaker on the stand, wire it up, and then complete the assembly by snapping the back on, which takes some force. Even if you are much less clumsy than I, this would be tempting fate.
Again, fortunately, there is no need to. Stick the wire through and put on the back, in whichever order you prefer, and then put the speaker on and connect it.
 Upgrade to Amazon's description of this item. July 17, 2006
22 out of 22 found this review helpful
FYI here are some product details not specified on Amazon's description. I did not realize these are only designed for smaller bookshelf speakers. Up to 15 lbs. The 24" stand has a 7.5" by 7.5" speaker base so it can handle a bigger speaker. I really needed the bigger base.
Model # BF31b
Package Dimensions
Black W = 30"
D = 10"
H = 3"
Product Dimensions
W = 11.5"
D = 11"
H = 31"
31" tall with 5"x5" top plate for small bookshelf speakers
 They're cheap June 23, 2006
14 out of 16 found this review helpful
These stands are cheap in both senses of the word. They're a lot less expensive than most other speaker stands of this size, which is great. I also found them to be cheaply built, which is less than great. They'll do the job, but I'm not particularly impressed with the quality.
The "wood" split in a couple of places on mine when I screwed the pieces together. I may have gotten the screws slightly crooked, but they looked straight to me. In any case, I did the best I could and it still split in two places. In one, I had to leave that screw out completely to make it not look really bad (the further the screw goes in, the more it splits). The other looks acceptable with the screw in, so I left it.
The "isolation pads" (little padded stickers you put on top of the stands for the speakers to sit on) don't seem to stick very well. One of mine comes off every time I move the speaker (and yes, I'm sure I put the sticky side down). I have another older set of Sanus stands (I think from a different line, or maybe just an older style -- they look somewhat similar, but are defintely better built) on which the pads work fine.
The carpet spikes are also not as nice as those on my other Sanus stands. The old set I have has relatively small metal spikes. These go into the carpet easily, and hold the stands very steady. They were also fairly easy to put in, as I recall. The spikes on these stands are plastic, and they're very hard to put in. I had to use a mallet to put them in. They're also pretty big, and I find they're very hard to get into the carpet. If they aren't all the way in, the stand is very wobbly. Once the spikes are in, they make a big hole (not good if you move the speaker). The older style is a lot better in that regard.
All that said, these will definitely hold the speakers adequately, and they look decent. They're far from top quality, but they're good for the price.
Great stands at a great price. May 3, 2005
8 out of 9 found this review helpful
These stand are very attractive, you can spend two to three times this much for stands of less quality, less stablity, and less features. Sanus Systems makes a top notch product. I am impressed with Sanus Systems value and excellent designs, from the finish and materials, to the wire management, and all points in between. Sanus makes products that are simple and they make products that are ornate, but they all share one thing, quality and fantastic design. Don't hesitate buying a Sanus Systems product. I have had many A/V products over the decades and Sanus is as good as it gets at this price point, and better than most who charge 5x more.
Perfect September 20, 2005
7 out of 7 found this review helpful
I wasn't expecting much for $30 but these were exactly what I was looking for. A nice looking 3 foot stand for my bookshelf speakers. It gives a very impressive look to your home audio system and really improves the treble as opposed to having your speakers on the floor. Great quality...definitely something to consider.
|
|
|
|
2005-2007 Zone1electronics All rights reserved.
| |
