|
Pure Resonance Audio PRS-CC555 In Wall Center Channel Speaker 150W 3" Mid Range Dual Tweeters | 
 enlarge
| Brand: Pure Resonance Audio
Category: CE
List Price: $299.95
Buy New: $199.95
You Save: $100.00 (33%)
Avg. Customer Rating:  1 reviews
nv: Power: 5-150 Watts
Woofers: Dual 5.25 PP cone, genuine rubber surround.
1.25 voice coils: Magnets 19 Oz
Midrange: 3 PP cone, genuine rubber surround, 6oz magnet, 0.5 voice coil.
Crossover: Phonalic board, 12dB woofer section, 24dB midrange section, 12dB tweeter section.
Frequency Response: 45Hz- 22KHz.
Sensitivity: 90 dB
Impedance: 8 Ohm
Weight: 1 ea. single pack 6 LBS
Dimensions: single pack 12.6 H, 17W, 8.75 L
Tweeters: Dual 1 Teteron dome, swivel 25 degrees,
Mounting Depth: 3.25
MPN: PRS-CC555
Availability: Usually ships in 1-2 business days
|
| Features:
| • | Fits between stand 16 stud centers. | | • | Polymide auto protective reset switch for tweeters and midrange. | | • | Ferro-fluid cooled, Neodymium magnet Crossover Phonalic board, 12dB woofer section, 24dB midrange section, 12dB tweeter section. | | • | Tweeters Dual 1 Teteron dome, swivel 25 degrees. | | • | Full video shielding for placement close to a Television. |
|
| Similar Items:
|
| Editorial Reviews:
Product Description
This New Pure Resonance model is an innovative concept in Center-channel In Wall Speaker design. This system produces strong, sophisticated sound - perfect for any room or use. It also has the ability to produce a large soundstage that is full and clean. This speaker is tailor designed for center-channel applications, with full video shielding for placement close to a Television. Armed with a unique Dual 5-driver compliment enabling it to split the signal between each of the components and a 3 Mid-Range and Dual Tweeters. This allows for effective handling of high power input without distortion, maintaining accurate tonal definition. Each speaker features crossovers that blend the sound spectrum seamlessly with skillfully engineered 6, 12, 18 and 24db networks. Polymide auto protective reset switch for tweeters and midrange. All speakers are designed for excellent performance in any environment, with durable construction and aluminum grilles. Pre-Construction Bracket - The pre-construction brackets can be installed where the speakers will be mounted before the drywall goes up. The drywall contractor will cut the corresponding holes as the drywall is installed. This reduces the installation time and allows for pre-planned wiring. Rust-proof Aluminum Grilles - Our Aluminum Grilles provide durable protection while allowing maximum sonic pass-through for clear high-end definition. Cut-OutTemplate and Paint Mask - The Cut-out template allows the installer to accurately measure the hole to be cut in the dry-wall. The Paint mask provides protection for the woofer and tweeter while painting the speaker baffle.
|
| Customer Reviews:
Very nice speaker June 19, 2008
This is a great front speaker if you need an in-wall speaker.
The quality of the sound is fantastic and you can clearly hear the dialogue or your show or movie. I used this speaker with the Polk Audio RC85i 2-Way In-Wall Speakers with a Denon Sub-Woofer and I have sound that seems a good as a theater.
The speaker is big, but it still fit between the studs with room to spare. Installation was simple but a little cumbersome. Unlike the polk speaker you can't just pull off the grill and turn the screws to lock it all in place. This one you have to take the mounting frame off the speaker and put that in the wall, then you can put the speaker up. The wire connections are top of the line, but they are a little difficult to get the wires into them when you are holding up the speaker with one hand and trying to thread the wires and push the holding pins with the other.
|
|
|
|
2005-2007 Zone1electronics All rights reserved.
| |
