|
Onkyo TX-SR606 7.1 Channel Home Theater Receiver (Black)  | 
 enlarge
| Brand: Onkyo
Category: CE
Buy New: Too low to display
New (11)
Avg. Customer Rating:  114 reviews
Color: Black
Media: Electronics
Batteries Included: Yes
Shipping Weight (lbs): 24.9
Dimensions (in): 14.8 x 17.1 x 6.9
MPN: TXSR606B
Model: TXSR606B
UPC: 751398008092
EAN: 0751398008092
Availability: Usually ships in 24 hours
|
| Features:
| • | Affordable 7.1-channel home theater receiver with full HD integration and video upscaling | | • | Power output: 90 watts x 7 channels (minimum) | | • | HDMI v1.3a Repeater (4 inputs, 1 output, 1080P compatible) | | • | 1080i Upscaling powered by Faroudja DCDi Edge | | • | TrueHD, DTS-HD Decoding |
|
| Accessories:
|
| Similar Items:
|
| Editorial Reviews:
Product Description
The Onkyo TX-SR606 7.1-Channel Home Theater Receiver provides high-definition video and audio processing for four source components. Onkyo's RIHD (Remote Interactive over HDMI) gives you inter-operability with the displays and playback components from other leading brands. With an expanded version of Audyssey's room correction technology, the TX-SR606 maintains the fullness of surround sound audio quality at low volume levels. With the latest HDMI version and advanced A/V processing capabilities, the TX-SR606 is a powerful control center for all high-definition media, including Blu-ray Disc and HD broadcasts. The TX-SR606 has Dolby TrueHD and DTS-HD Master Audio to enable a lossless, bit-for-bit soundtrack that is identical to that of the studio master. Both codecs are designed for the Blu-ray Disc format. Dolby Digital Plus has been designed for high-definition video delivered via disc media, broadcasts and online content. DTS-HD High Resolution Audio, meanwhile, offers a greater bit rate, a higher sampling rate, and more channels than the core DTS technology. The TX-SR606's HDMI inputs can receive pristine digital video from HDMI-enabled components for a single-cable output to a display device with an HDMI or DVI connection. Advanced 32-Bit Processing DSP Chip Tone Control (Bass/Treble) for Front L/R Channels Color-Coded 7.1-Multichannel Inputs RIHD (Remote Interactive over HDMI) for System Control HDTV-Capable HDMI Switching Deinterlacer with Faroudja DCDi Edge (Directional Correlational Deinterlacing) Technology Audyssey 2EQ to Correct Room Acoustic Problems and to Calibrate Speakers A/V Synchronization Function (Up to 100 ms in 10 ms Steps) Audyssey Dynamic EQ for Loudness Correction SIRIUS Satellite Radio Through optional SiriusConnect Home Tuner Kit Compatible with RI (Remote Interactive) Dock for the iPod Dimensions - Width 17 1/8 x Height 6 7/8 x Depth 14 3/4 (435x174.3x374.7mm) We
|
| Customer Reviews: Read 109 more reviews...
 Best Bang for the Buck in Next-Gen Home Theater Receivers August 30, 2008
71 out of 71 found this review helpful
I'll start by saying I'm not an Audiophile. I just wanted a decent mid-range receiver that does all the latest lossless audio formats and has 7.1 channels so it's ready to take advantage of BluRay as that format evolves. So my primary focus is on a system that plays audio for movies and video games as it's primary function. Currently I have this receiver setup in a 5.1 configuration since that's the type of receiver it replaced. I have more speakers on order to expand it out but to be honest, right now if you're building a home theater from scratch, you only need 5.1 . The 7.1 specs aren't really supported yet and DVDs and Playstation/Xbox are all 5.1, so if you're starting from scratch save some money and setup for 5.1 first and expand as support grows.
I used the automated speaker calibration feature to setup all the channels. This is where you place the provided mic at ear level at three different listener positions. The receiver then sends out tones which will drive you and your dog nuts for about 15 minutes while the entire process goes on. Once it was done however, I was/am very pleased with the results.
I've heard some people ask about humming, i can detect no humming. I have some WiFi equipment close by which is 2.5 ghz and so far have not heard any humming. Some other people have said the Receiver runs hot to which I would ask those people, is this your first receiver? They do run hot ! This one runs no hotter than the old one i replaced from a different manufacturer so as far as I'm concerned, the heat issue is normal. I have it in a small component rack that's enclosed on the sides and back with a door on the front, it's got maybe half an inch space around the sides and 2 inches of space on top and so far everything is good.
The back has tons of inputs, but the primary reason I waited for the 606 over the previous model is the number of HDMI ports, the next generation audio/video cable which is a requirement for full resolution BluRay playback. They're rev 1.3a to support all the latest audio formats as well (none of which are currently supported by the discs themselves yet though). The receiver will pass through a 1080p signal from a BluRay or other high def video source. If you feed it a standard def 480i video source, it will upscale it to 1080i or 720p. It does a decent job but i would say upscaling isn't the receivers strong point, it does an acceptable job though. But lets face it, Onkyo doesn't build TV's, their bread and butter isn't video, it's audio.
I'm pleased with the performance and the styling of the receiver, it's just very basic and sleek. No built in graphical user interface and all that other nonsense that receivers 3x this price but no more times the performance come equipped with. This receiver for a mid end system for movies and video games just really can't be matched in terms of performance per dollar spent.
I have matched this receiver with some Polk Audio speakers. Specifically i have a Polk CSi3 center channel and six Polk RTi4 bookshelf speakers (all of which you can find at great prices here on Amazon where I ordered them from) and I am very very happy with the results. The Polk speakers like the Onkyo 606 receiver are over achievers for their price point, so they match together extremely well.
The only thing I have left to say is buy it, I wouldn't hesitate recommending this receiver to anyone looking for a solid movie/video game home theater experience.
 One solution to HDMI buzz October 23, 2008
27 out of 27 found this review helpful
Other reviews cover this receiver with excellent detail (setup, sound, etc.) and I agree with most comments. This is a great unit for the money. Many features, easy setup, poor upscaling, great HDMI support.
Unfortunately I have the HDMI buzz issue mentioned by several reviewers but fortunately I found the cause and one solution.
I had a XBOX 360 connected via HDMI and a Gamecube connected via component. Both output through HDMI to the tv. When I first powered up the SR606 and the XBOX I heard a continuous buzz or hum through the speakers which became louder when the volume increased. This made quiet movies nearly unwatchable as dramatic scenes were dominated by **BUZZZZZZZZZZZ** instead of cinematic tension.
I called Onkyo support in New Jersey and they quickly brushed me off with a flat recommendation of "return the unit to the retailer" with no diagnostic advice. I followed this direction and predictably, the new unit suffered the same ailment. The buzz continued.
All of my audio/video gear is connected to a single, ungrounded, electrical outlet (building was built in 1915). After a bit of Internet searching I found an article which discussed "common impedance coupling" whereby many high draw devices (such as a plasma TV, A/V receiver, and XBOX 360) which are connected to a common electrical run will produce a voltage drop and potentially introduce noise. I am not an expert in electricity but this lead me to investigate the way the components were connected to the SR606, rather than the SR606 itself.
I found that the XBOX 360 was responsible for the buzz. With the XBOX disconnected from the wall outlet, the buzz stopped even when all other components were connected and turned on. Thinking that the metal HDMI connection could be carrying the noise to the SR606 I connected the XBOX HDMI directly to the tv and connected the XBOX sound to the SR606 via a TOSLINK optical cable in order to remove any conductive connections between the SR606 and XBOX. This removed the buzz!
As a test I re-connected the XBOX HDMI to the SR606, kept the TOSLINK connection, and disabled the HDMI sound input for the XBOX on the SR606. This let the sound only come from the optical connection but retained the metal link between the SR606 and the XBOX. The buzz was much quieter but remained.
The last test was with the Gamecube which draws about 40 watts to the XBOX's 175. Although it connected via component, it output via the HDMI so I thought that if the buzz was related to the HDMI output on the SR606 I would hear it when using the Gamecube. I hear no buzz when using the Gamecube. Unfortunately do not have another device to test buzzing with HDMI input but it seems to me that the buzz was related to the following:
1) Using a single, ungrounded electrical circuit for all devices.
2) Connecting the XBOX 360 (which consumes a large amount of electricity) to the SR606 via a conductive connection.
I imagine that if I had independent outlets, homerun back to the breaker box I could separate the SR606 and the XBOX and correct the buzz. Unfortunately I spent all my cash on A/V gear so electrical work will have to wait. However, if you have better wiring in your house (or low draw A/V equipment) I imagine that your SR606 will be buzz free even when using HDMI connections.
Excellent value. Remote and input flexibility could be better. July 14, 2008
22 out of 23 found this review helpful
The first thing that must be said is that for the money, this product is hard to beat. Excellent features, quality, plenty of power. 4 HDMI inputs and 4 digital audio (coax and optical). The Audyssey system automatically applies adjustments that most people would never apply otherwise.
The remote is competent but forget about its universal remote capability. They give you multiple codes for each device and you just have to try them all. And then, some never did work. Not a problem for me since I am using a Logitech Harmony (and so should everyone, IMO).
A bigger disappointment was that the audio-video inputs are more limited than I had expected. If you have several older devices, you should know that only the HDMI, digital audio, and component inputs can be connected to different inputs. And they can't be renamed. So anyone using my system has to know that TV/GAME button shows the old TiVo box and that the laptop is connected as CD. And if I had one more device, I'd have been out of luck.
But for around $400, what a terrific performer.
 Buzzes like a fridge.... August 11, 2008
19 out of 22 found this review helpful
Well not exactly like a fridge, more like two or three fridges.
This receiver is powerful and decodes everything under the sun. The sound coming out of this receiver is great and very clean. I've never bought an A/V receiver before and was a bit nervous about setting it up, but I set this up very easily with almost no learning curve. The Audyssey speaker set-up is very easy and gives great results.
The first problem with the receiver is that it runs very hot. Too hot to touch. I think this is by design and from what I've read these receivers do not have overheating issues, but you have to be careful where you put it. Forget about having a closed cabinet. Also, the thing runs very hot in a cabinet with an open front but with a closed back. Basically you need this behemoth out in the open if you want to be sure you don't start a small fire. The thing is huge, about half the size of a coffee table, and I don't like having it out, especially when I have a cabinet with all my other devices.
The second problem with the receiver is the deal-breaker however. If you have a PS3, the receiver causes a terribly annoying buzzing at mid to high volumes. Basically any volume 25+ causes the buzz. The buzz is incredibly loud and comes out the speakers. From what I've read Onkyo apparently fixed this issue and came out with the Onkyo TX-SR606B. This is what I ordered from J&R, and assuming they sent me the 606B, the receiver still buzzes.
Overall, I would recommend the receiver if you don't have a PS3. If you do, then I don't know-it's up to you. I expect to be completely satisfied with a $500 dollar electronic device, so I'm sending it back. And I never send things back.
Something to keep in mind is that although the receiver decodes TrueHD and DTS-HD, if you have a PS3 it's not even needed. The PS3 decodes these formats itself and sends the uncompressed PCM data to the receiver. The receiver doesn't handle any of the decoding. I expect my PS3 to be my Bluray/DVD player for many years, so in the end I may not even need all the features of the SR606 and can just go with a non-buzzing receiver that doesn't have a tendency to heat my apartment in August.
 Buzz/hum at 1080P and LPCM audio through HDMI July 13, 2008
17 out of 24 found this review helpful
Purchased this on features but was disappointed on performance. No matter what I tried (lifting grounds, star grounding, expensive isolation transformer) I could not get rid of a buzz/hum when using HDMI input with a device outputting 1080P (video) and LPCM audio. It is NOT a user servicable grounding issue. Onkyo never replied to my questions. Check the AVS forum for lots of people experiencing the same issue. I don't know if its just a bad manufacturing run or not. This unit simply can not play under these circustances without the buzz/hum. I tried two different devices feeding it A/V with the same results. Either I got a bad unit or this is a bad design.
|
|
|
|
2005-2007 Zone1electronics All rights reserved.
| |
