|
Zeikos Battery FOR CANON BP-819 BP-808 BP-809 2700mAh Vixia HF11 HG20 HG21 | 
 enlarge
| Brand: ZEIKOS
Category: Photography
Buy New: $23.99
New (3) from $23.99
Avg. Customer Rating:  2 reviews
MPN: ZE-BP819
Model: ZE-BP819
UPC: 811709011972
EAN: 0811709011972
Availability: Usually ships in 1-2 business days
|
| Features:
| • | CHARGE THIS BATTERY WITH ORIGINAL CHARGER CG-800 OR GENERIC CHARGER | | • | YOU CAN CHARGE THIS BATTERY WITH THE CANON AC ADAPTER THAT COMES WITH YOUR CAMERA; PLUG DIRECTLY INTO THE BATTERY PLUG-IN | | • | BP-819 2700 mAh Lithium Ion Rechargeable Battery ( 100% Memory Free ) | | • | Integrated push button shows remaining Battery LIFE with LED lights |
|
| Similar Items:
|
| Editorial Reviews:
Product Description
BATTERY FOR CANON COMPATIBLE WITH THE FOLLOWING CANON BATTERY BP-808 BP-809 BP-819 2700 mAhCOMPATIBLE WITH THE FOLLOWING CANON CAMCORDERS FS10 VIXIA HG20 VIXIA HF11 FS11 VIXIA HG21 VIXIA HF10 VIXIA HF100 FS100NOTE: When you get error message " camera can not communicate with this battery" select yes and continue.regarding charging this battery; the cable that came with the camcorder you can plug it to the hole on the battery and leave the camcorder off and the battery will charge.
|
| Customer Reviews:
Mixed review, please read. October 16, 2008
3 out of 3 found this review helpful
First of all it does what it says. It will power your camcorder, I have the Canon HF10. When I received this battery the first thing I did was push the button on the battery on the battery to see the charge level. It lit up 2 lights, the 100 and the 75. The display is missed labeled, when fully charged all led's will light. It appears that the label is backwards, it starts at teh 100 mark (full). Second thing I did was to insert it inot the Canon factory external charger (CG800), it failed to charge. I then used the power adapter that came with camera and charged the battery over night. The next day I connected the battery to the camcorder, as stated, the camera did not see the battery. Select YES keep using the battery. I then start to record with the camcorder. The factory battery (BP-809, 890mAh) lasts about 90 minutes. With this battery I came back at 2 hours (120 minutes) and checked the battery meter, it displayed only one light, at 100% full (the red light, remeber it is backwards, it was actually on empty.) I do not know if the battery running out of juice and shutting down with out notice is harmfull to the camera or the process of recording and saving. But seeing it at one light at 120 minutes I would not use it any longer than 2 hours. I do not beleive the battery will last much longer then 2 hours safely. Using this information I do not beleive the battery is actaully 2700 mAh, However it does last longer the the factory 890 mAh battery. And it is cheaper the the factory BP-819 Canon battery. Over all it is a good trade off. If you wish to the limits of the battry and drain every bit out of it then stick with factory batteries.
Adequate November 18, 2008
I have the same problem as J.Niedermier. It is labeled backward. (No quality control and that makes me wonder about the unit as a whole). Each time the camera is powered ON and not recognizing the battery is a hassle because you'd have to keep responding "continue".
-
I just ordered the CG-800 and will see if that will charge this battery.
|
|
|
|
2005-2007 Zone1electronics All rights reserved.
| |
