|
Tiffen 77mm UV Protection Filter | 
 enlarge | Brand: Tiffen
Category: Photography
List Price: $51.99
Buy New: $14.75
You Save: $37.24 (72%)
New (9) from $9.39
Avg. Customer Rating:  63 reviews
Media: Electronics
Autographed: No
Memorabilia: No
Shipping Weight (lbs): 0.4
Dimensions (in): 4.3 x 4.2 x 0.8
Warranty: 10 years warranty
MPN: 77UVP
Model: 77UVP
UPC: 049383099454
EAN: 0049383099454
Availability: Usually ships in 24 hours
|
| Features:
| • | Most popular protection filter | | • | Provides basic reduction of ultraviolet light | | • | 77mm diameter | | • | Helps eliminate bluish cast in images |
|
| Accessories:
|
| Similar Items:
|
| Editorial Reviews:
Product Description
Film, as well as video, often exhibits a greater sensitivity to what is to us invisible, ultraviolet light. This is most often outdoors, especially at high altitudes, where the UV-absorbing atmosphere is thinner; and over long distances, such as marine scenes. It can show up as a bluish color cast with color film, or it can cause a low-contrast haze that diminishes details, especially when viewing far-away objects, in either color or black-and-white. Ultraviolet filters absorb UV light generally without affecting light in the visible region. It is important to distinguish between UV-generated haze and that of air-borne particles, such as smog. The latter is made up of opaque matter that absorbs visible light as well as UV, and will not be appreciably removed by a UV filter.The UV Protector shields lens from dust, moisture, scratches, and breakage.
Amazon.com Product Description
Protects lenses from dust, moisture, scratches, and other damage. These filters can be kept on the camera at all times.
|
| Customer Reviews: Read 58 more reviews...
 Vignetting July 11, 2005
59 out of 65 found this review helpful
While this filter kit does a fine job with doing the filtration these 3 filters were designed for, you can be guaranteed that when you use them on wide angle and ultra-wide angle lenses you will get vignetting. Vignetting is the darkened areas around the edges of your photographs. This is caused because these particular filters have threads in front of the filter glass which partially block the light coming into wide angle lenses when set at their widest setting. I normally like this type of filter because it allows me to replace the lens cap, thus allowing me to leave the filter on the camera's lens all the time - one of the prime reasons I like the UV lens - lens protection. The alternative is to purchase an ultra-thin lens which doesn't have the threads on the front, doesn't cause vignetting, but doesn't allow you to replace the lens cap. So, as you can see there is a trade off. Do you want to leave the lens on the front when you put the camera away for the moment, but have to remove your filter as well....what a pain at a sporting event or where you need your camera to be ready all the time. Or, do you want to be able to replace the cap on the front and protect the filter when you put the camera away or replace lenses, but realize you can't shoot at your wide angle lens' widest setting due to vignetting? Tough choice. I've done it both ways. There's no real happy medium....just a choice.
Surprisingly good (except in one situation, which it will create internal reflection) October 9, 2006
24 out of 26 found this review helpful
This UV filter does it job to protect the lens well. The build is solid (metal construction). The glass is also descent quality.
About the performance, it absorbs some UV light. The UV light absorbtion is hardly noticeable, probably the sky 1-A and the haze filter version will absorb more UV light than this lens which is fine for me.
Now, about the one problem which is the internal reflection. I've heard many people say that it mostly happens during night or low light shooting. I found out that it is not caused directly by the low light/night situation. The internal reflection will appear when there is a strong/bright source of light in comparison to the overall exposure (the surrounding environment). To put it in example (which hopefully is easier to understand), when you take a picture of a lamp during nightime and the light is much brighter than the surrounding area then you will see the internal reflection. as you move the position of the light to be closer to the sides/corner of the picture (and not in the center of the picture), the internal reflection reduces and finally dissapear (if you move the light far enough from the center). And if the light isn't too bright/contrast compare to the surrounding environment then there will be no internal reflection. but of course most of the time, a lamp at nightime is often very bright. But the point that I'm trying to make is that the internal reflection doesn't happen all the time during low light or night time.
Additionally, the internal reflection isn't only happening at night. it can also happen in the afternoon if you are taking a picture of a sun for example. basically same rule as above, on how bright is the light source compared to the surrounding area, and as you move the sun from the center of the photo and near the side the internal reflection will move to the side/dissapear (also depending the angle). But the best way is just to remove the filter during these situations.
Hope this explanation helps you to reduce the occurence of internal reflection by identifying correctly when the internal reflection will occur and then remove the filter during those situation (which is not hard to do).
I'm actually not a fan of lens filter (any filter) as I think it will only degrade picture quality as we added another layer between the sensor and object, but I decided to use them anyway for all my lens. And I would recommend everyone to get one of this filter if you don't have any filter for your lens yet.
I use this filter on my Nikon 80-200mm AF-D ED IF f/2.8 lens. Very sharp and highly recommended lens.
 The worst constructed filter I've seen in my life time. June 1, 2001
21 out of 28 found this review helpful
The worst constructed filter I've seen in my life time. Extremely thick. Its light weight makes me doulbt if it is really made from glass. The mount ring can move sidewards for about 1mm apart from the glass ring, because it is made from a piece of plastic[...] When mounted on lens, it is really too loose to keep it from dancing. It's already full of dust between the glass ring and the mounting ring before I took it out from the shipping box, which make rotating a painful feeling. Avoid any rotation needed filter made by Tiffen!!!!!! Perhaps, any filter from Tiffen. Go B+W or Helipon, they won't cost you much more but you'll see what a truely beautiful filter should look like. [...]
 Getting what was expected March 3, 2006
12 out of 14 found this review helpful
A UV Filter is about as standard as filters get. Tiffen makes a good quality filter and this was just as expected. The price was equilivant to other vendors and as expected I had no problems; ordering was simple and the product came on time.
Quality Lens Protection and Decent UV Filtration for Your SLR Camera January 24, 2008
12 out of 13 found this review helpful
You spent a lot of money for your SLR or digital SLR camera, and then you plunked down another large chunk of cash for a quality lens. Do you really want to blow another heavy chunk of change for a basic, thread on UV filter? Well, I would normally advise that you don't skimp on quality when it comes to filters. After all, would you pay a premium price for a high performance automobile, only to fill it with watered down fuel? I should nope not! So is it such a bright idea to buy such a low cost UV filter for your high-end SLR lens? Well, maybe it is if you are considering the Tiffen 77mm UV Protection Filter.
This filter does NOT offer the highest level of UV filtration, but it is rather sufficient for most conditions, and the build quality and materials used in this filter are very good. For most digital SLR users, a UV filter is a must have for protecting your lens optics, and it helps to clear up the hazy and washed out look in many of your outdoor photos. This filter has proven to clean up many of my digital photographs, and I have found almost no internal reflection artifacts. Notice I said ALMOST no internal reflection. I leave my UV filters on all of my lenses almost all of the time, and this filter has produced some minor reflection when shooting indoor photos with my Sigma 10-20mm ultra-wide angle lens. This seems to only happen when shooting in dim lighting conditions, and when aiming the lens in the direction of a strong light source, such as a table lamp. Since my Canon EOS 40D has a "Live View" feature that lets me see what the picture is going to look like (displayed on the 3" LCD), I can see the reflection artifacts before I shoot the picture, and therefore have found ways to reframe my shots to avoid the reflections. However, I recommend that you simply remove the UV filter when shooting in these conditions.
As I said before, I typically do not recommend buying low cost filters for your high quality lenses, but I prefer to invest my money on creative filters and not pour too much into a filter that is primarily used to simply protect the front of the lens. Many manufacturers, including Tiffen, offer higher quality UV/Haze filters for SLR lenses, and you may wish to spend the extra money if you are looking for deeper UV removal from your pictures. However, if you are looking for great lens protection and a decent level of UV filtration for a modest investment, you honestly can't go wrong with this filter. Just remember to remove the filter, or frame your shots carefully when shooting in situations where direct light reflection may be an issue.
Quality = **** (4)
UV Filtration = **** (4)
Value = ***** (5)
|
|
|
|
2005-2007 Zone1electronics All rights reserved.
| |
