|
Platinum DSLR Cleaner | 
 enlarge
| Brand: Dust-Aid
Category: Photography
List Price: $29.95
Buy New: $27.95
You Save: $2.00 (7%)
New (7) from $27.95
Avg. Customer Rating:  2 reviews
Media: Electronics
MPN: DA02
UPC: 858061001050
EAN: 0858061001050
Availability: Usually ships in 1-2 business days
Shipping: Expedited shipping available
Condition: Very Fast ship-Brand New!
|
| Features:
| • | Omega Satter Part Number DA1 |
|
| Similar Items:
|
| Editorial Reviews:
Product Description
The Platinum DSLR Cleaner will clean any sensor filter no matter its coating or internal dust removal system (IDRS) filter housing. Its platinum cured cleaning silicone can also be cleaned with specially made cleaning strips to extend its cleaning life span. One of the biggest features with the Platinum cleaner is its ability to have it s cleaning silicone repeatedly cleaned free of accumulated dust and fibers. The Platinum cleaner comes with 6 silicone cleaning applications and with the purchase of additional cleaning strips the life span of the Platinum could be extended indefinitely. The cleaning adhesive used to clean the Platinum silicone has been developed and tested not to transfer any of the adhesive to the silicone. The Platinum DSLR Cleaner is made from a specially manufactured platinum cured silicone that does not use any molds or mold release agents in its creation. This eliminates the chance of mold release agents permanently bonding and contaminating the silicone when it s molded. The silicone used has a patent pending micro texture on the cleaning surface which helps to stop the formation of a vacuum seal when it s applied to a cleaning surface. When the silicone is depressed on a surface the micro texture flattens out and adheres to any dust or fibers. Then, when the pressure is released the micro texture flexes back into place and allows air in, breaking the vacuum seal. This helps to reduce the adhesion strength and impact of the cleaning. Note - Dust-Aid has eliminated every possible contamination to the cleaning silicone and have designed the cleaning silicone not to transfer its internal oils to a surface when applied in a straight up and down manner. However, if the cleaning silicone is accidently dragged or twisted and leaves residue, it can easily be removed with the Dust-Wand kit.
|
| Customer Reviews:
 Ineffective July 4, 2008
1 out of 2 found this review helpful
I used this on a dirty Canon 40D sensor. I took "before" shots to compare to the "after" shots. My "after" shots looked almost identical to the "before" shots. It appears that the adhesive used is too weak to be effective at removing dust. Next I tried a LensPen sensor cleaner and was able to remove much of my dust. Also, the cleaning tip of the wand is contaminated by any accidental touching by your finger or internal parts of the camera. In order to clean the tip should this contamination appear, they tell you to buy yet another one of their products. If you don't clean the tip, you will get smudges on your sensor. Dust-Aid is a disappointing product.
 Dust Aid Platinum - Winner July 31, 2008
This product works great on all digital SLR sensors. Used it on both Cannon and Olympus products and it is far better than the traditional suggestions for cleaning stuck on Dust.
|
|
|
|
2005-2007 Zone1electronics All rights reserved.
| |
